Durability
Your device is made for rough ambient
conditions. It is tested and certified
according to the international standard
IEC 60529/level IP54 regarding water and
dust protection and according to IEC
60068-2-27 regarding shock protection.
Accessories to be used with this device do
not meet the same durability, dust-
resistance, or water-resistance
specifications as the device itself. For
example, all the chargers are only to be
used in dry conditions. They should never
be used when damp or wet.
Using your device in wet or dusty
conditions
•
Water-resistance means resistance
against clean freshwater only. Do not
expose the device to any other type of
liquid. For example, do not expose the
device to ocean water, drinks, mud, or
liquid chemicals or detergents.
•
Do not submerge the device in water.
•
Do not expose the device to hot water.
•
If the device has been exposed to
water, wipe it off with a dry cloth. If it
has been exposed to salt water or
other liquid, splash immediately
some clean freshwater on the device.
The device must be carefully wiped
dry.
•
Never connect anything to the bottom
connectors if they are dusty, wet or
damp. For example, never charge the
device when the bottom connectors
are wet or damp. Never try to connect
anything to the connectors by using
force as this may break the device.
•
Before opening the back cover (1),
clean and dry the device to prevent
4
Safety
© 2009 Nokia. All rights reserved.
4
water or dust from reaching the
interior of the device and only open
the device in dry and clean conditions.
Make sure the interior of your device
and the back cover (1) seals are dry,
clean, and free of any foreign objects.
Foreign objects or dust may damage
the seals against water.
•
If connectors are dusty, they must be
carefully cleaned before using them.
To clean the bottom connectors and
the bottom connector area, you may
open the connector cover (2) at the
bottom of the device and carefully
splash some clean freshwater onto
the bottom connectors to remove the
dust. Wipe the device and connector
area dry carefully. The inside of the
connectors must be allowed to dry.
Never insert any tools into connectors
or connector area.
1 Back cover
2 Connector cover
Durability
5
© 2009 Nokia. All rights reserved.
5
Want to get your device
ready to use? Rely on
robustness and durability
even if ambient conditions
are rough.